Description
RE659 :
Alula Wireless Encrypted, Ceiling-Mount, 360 Degree Motion Detector (for Connect+ Panel)
The RE653 Protects Indoor Areas and Goes into Alarm when Motion is Sensed.
To enroll the RE659, Begin by Entering the Serial Number into the Security Panel.
Alternatively, The Sensor can be Enrolled by Placing the Panel into Enrollment Mode, and then Pulling the Battery Tab or Tampering the Device.
To Install the RE653, Begin by Screwing Two #8 Screws Into the Ceiling, Leaving 1/4 inch of Thread Exposed. Next, Slide the Back Plate Over the Screws and Rotate the Back Plate.
Screw the Third #8 Screw Through the Wall Tamper into the Ceiling, Ensuring that the Wall Tamper Screw is Attached to Something Solid.
Tighten all Screws Until Snug.
Then, Insert the Square Nut into the Square Slit of the Cover and Start Threading the #4 Screw into the Side of the Cover.
Close the Cover and Conduct a Walk Test.
After Testing, Take the Unit Out of Walk Test Mode and Close the Cover Again.
Finally, Finish Threading the #4 Screw Until it is Snug.
Product Features :
- 360° Detection Range with 62 Distinct Detection Zones
- Range Up to 40 feet in Diameter
- Selectable Pulse Count 2 or 4
- Designed for Commercial Applications
- 5 Year Warranty