Description
The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve. This device is available in two models; the OSYSU-1, containing one set of SPDT (Form C) contacts and the OSYSU-2, containing two sets of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2” to 12” (50mm to 300mm). They will mount on some valves as small as ½” (12,5mm). The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device.
Features:
- Visual switch indicators
- Two conduit entrances
- Three position switch detects tampering and valve closure
- Knurled mounting bracket prevents slipping
- Fine adjustment feature for fast, easy installation
- One or two SPDT contact models (-1,-2)
Technical Specifications
Compliance
RoHS,cULus Listed,FM Approved, CE
Contact Rating
10.0 Amps at 125/250 VAC, 2.0 Amps at 30VDC Resistive, 10 mAmps minimum at 24 VDC
Finish
Red Powder Coat, Black Powder Coat
IP Rating
IP65, IP67
Material
Die Cast
Operating Temperature
-40º F to 140ºF (-40ºC to 60ºC)