Description
Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions.
Features:
- Voltage tester automatically selects voltage or continuity; automatically powers on when any measurement is attempted
- Backlit LCD display
- CAT IV 600V modern solid-state design for safety
- Tests GFCI protected circuits
- Uses standard replaceable multimeter test leads
- Features built-in test lead holders on back of meter
- Integrated flashlight
- 9.8 ft. (3 m) drop protection
- IP53 dust and water resistant
- Before each use, verify tester operation by measuring a known voltage.
- Never use the tester on a circuit with voltages that exceed the category based rating of this meter.
- Do not use the tester or test leads if they appear to be damaged.
- Do not use the tester or test leads if they appear to be damaged.
Warnings:
Technical Specifications
Overall Height
1.64" (4.2 cm)
Ingress Protection
IP53 (except test lead jacks)
Standard
- CAT IV 600V
- CE
Batteries
3 x AAA
Tests Continuity
Yes
Pollution Degree
2
Material
- Thermoplastic
- Electronics
Voltage
2 to 600V AC/DC
Weight
6.00 oz (170.0 g)
Drop Protection
9.8' (3 m)
Special Features
Built-in Test Lead Holder and Integrated Flashlight
Integral Lead Storage
Yes
Overall Width
2.31" (5.9 cm)
Control Type
Digital
Display
Digital LCD
Type
Digital Voltage and Continuity Tester
Overall Length
6.06" (15.4 cm)
Application
Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly
Frequency
45 to 400 Hz
Included
- Tester
- Test Leads
- Batteries
Style_Name
AC/DC Voltage & Continuity
Battery Type
Alkaline
Accuracy
+/- (2% + 2V)