Description
Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It features indicators for positive and negative DC polarity, and tests DC voltages as low as 1.5V. It tests AC voltages 12-240VAC. Excellent for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. It operates on 2 x AAA batteries.
Features:
- Voltage Tester for AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages
- Tests DC voltages from 1.5V to greater than 17 to 24V at four useful levels aligned with commonly used DC voltages
- Bright LEDs illuminate to indicate the type and level of voltage detected
- Built to withstand a 9.8-Foot (3 m) drop
- Indicates polarity when measuring DC voltages
- Powers off automatically after approximately 2 minutes of non-use to conserve battery life
- CATIII 250V, Class 2, Double insulation
- Ingress protection IP41 dust and water resistant
- Built-in test lead holders on sides of tester
- Low battery indicator with easily accessible battery compartment
- Read, understand, and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
- Before each use, verify tester operation by measuring a known voltage.
- Never use the tester on a circuit with voltages that exceed the category based rating of this tester.
- Never use the tester on a circuit with voltages that exceed the category based rating of this tester.
- Usage of this tester in any way other than that specified by the manufacturer can impair safe operation, resulting in severe injury or death.
Warnings:
Technical Specifcations
Drop Protection
9.8' (3 m)
Ingress Protection
IP41
Special Features
- DC Polarity Indicators for DC Positive
- DC Negative
- and Both Illuminated for AC. Tests Low DC Voltage to 1.5V. Built in Test Lead Holders on Sides of Tester.
Display
Analog LED
Included
- Tester
- User Manual
- Batteries
Pollution Degree
2
Integral Lead Storage
Yes
Batteries
2 x AAA
Control Type
ON/Off Switch for Power ON/OFF
Overall Width
1.11" (2.8 cm)
Overall Height
1.52" (3.9 cm)
Weight
2.3 oz (66 g)
Application
Measures AC/DC voltage
Standard
- CATIII 250V
- CE
Case Included
No
Material
- Plastic Housing
- PCB with Electronic Components
Overall Length
5.24" (13.3 cm)
Lead Length
9" (22.9 cm)
Frequency
50/60 Hz
Voltage
- AC Level Indicators: 12V
- 24V
- 120V
- 240V and DC Indicators:1.5V
- 9V
- 12V
- >17-24V
Tests Continuity
No
Interchangeable Leads
No
Style_Name
12/240 V Tester
Battery Type
Alkaline
Accuracy
- Approximately 70 to 100% of Indicated Voltage
- Except for 2V DC (84 to 100%) and >17V DC (94 to 100% of 17V)