Description
The Russound P125 is a 2-channel dual source power amplifier with auto-source switching. It features Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from the secondary source. A speaker-level input can be connected and assigned as either the primary or secondary source. This amplifier can be used for power upgrades in zones for large speaker selector or volume control systems.
Features:
- Volume and balance allows for control at the component instead of volume control or keypad
- A/B speaker switching easily toggles output between two sets of speakers or zones
- Signal sensing inputs automatic turn on/off and switching to second source
- Bridgeable - delivers higher output for use with a subwoofer or outdoor speakers
Technical Specifcations
Crosstalk
- > 70dB @ 1 kHz
- ref. to rated power @ 8 ohms
Frequency Response
- 20Hz to 20kHz +0.0dB/- 0.5dB @ 8 ohms
- 1W
Input Sensitivity
500mV for 80W at 8 ohms
Power Output
- 80W per channel at 8 ohms
- 125W per channel at 4 ohms
- 250W bridged
Power Requirement(s)
- 120VAC 60Hz 5.8A
- 230VAC 50Hz 3A
- IEC 320 type connector with 3 terminal detachable power cord.
Signal to Noise Ratio
93dB A-weighted
Shipping Dimensions
- 18.8” (W) x 5.3” (H) x 22.0” (D)
- (47.8 x 13.5 x 55.9 cm)
Shipping Weight
31.4 lbs (14.2 kg)