Description
The PAD200-DUCT is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Air sampling is accomplished by two tubes which protrude into the duct. An exhaust tube of one standard length (7”) is supplied in the installation kit with the smoke duct unit. Once the duct width has been determined the air intake sampling tubes must be ordered. Sampling tubes are supplied in three standard lengths: 2.5 ft., 5 ft., and 10 ft. and cut to size to fit the duct. Mounting the duct smoke unit is accomplished by the use of a template and 2 sheet metal screws, which are provided. Mounting can be achieved without the removal of the clear cover which is secured by 4 capture screws.
Features:
- Detects smoke in building HVAC ducts
- Ships complete with housing and head
- Compatible with addressable IPA and AFC/ARC series panels
- Installation without removing the head
- Listed Air Velocity of 100 to 4,000 ft/minute
- Durable plastic enclosure and clear cover
Technical Specifications
Air Velocity
100 to 4000 ft./min
Compliance
UL Listed, FM Approved
Current
300 μA
Finish
Gray backbox with clear cover
Material
Plastic backbox, clear plastic cover
Operating Humidity
10% to 85% Relative humidity (non- condensing)
Operating Temperature
32°F to 120°F (0°C to 49°C)
Voltage
24 VDC
Warranty
5 Years Warranty