Description
Second-generation NFC card reader and intercom
Features :
- Unlock using an NFC card or UniFi Identity mobile app
- Doorbell for unlock with video of visitor and two-way intercom
- Video works at ADA-compliant mounting height
Technical Specifications
Ambient Operating Humidity
5 to 90% noncondensing
Ambient Operating Temperature
Device: -30 to 45° C (-22 to 113° F)
Display:* -10 to 45° C (14 to 113° F)
*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v1.3.28)
Button
(1) Factory-reset
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Camera View Angle
H: 96.67°, V: 123.15°, D: 153.11°
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Connectivity
BLE 4.2
NFC
BLE 4.2
NFC
Dimensions
6.3 x 1.59 x 1.6" (160 x 40.4 x 40.55 mm)
160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")
Document Number, And Issue Date And/or Revision Level
UA-G2-Pro/UA-G2-Pro-Black, V02
ESD/EMP Protection
Air: ±15kV, contact: ±8kV
Enclosure Material
Polycarbonate, glass
LEDs
R/G/B/W/Amber (Learn more)
Max. Power Consumption
6W
Microphone
Yes
Mount Material
Aluminum alloy
Mounting
Wall, gang box
NFC Frequency
13.56 MHz
NFC Read Range
< 30 mm
NFC Technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa™ (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa™ (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
Networking Interface
(1) GbE RJ45 port
Operating Environment
Outdoor use
PoE Cabling Requirements
Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Sensor
Proximity sensor
Software
Management application: UniFi Access: Version 1.5.9 and later
Management application: UniFi Access: Version 1.5.9 and later
Software Information
The software version of a product can be checked at https://unifi.ui.com
Speaker
(1) 4 ohm, 1.5W
Supported Voltage Range
48V DC
UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Weatherproofing
IP55
Weight
4.8 oz (136 g)
136 g (4.8 oz)