Description
Display that pairs with the Access Intercom for visitor screening and remote access control, to mount in multiple locations throughout your building.
Features:
- Two-way audio
- Instant live view
- 5in touch display
- Connect and power using a PoE switch
Technical Specifications
Ambient Operating Humidity
5 to 95% noncondensing
Ambient Operating Temperature
0 to 40° C (32 to 104° F)
Button
Factory reset
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Dimensions
5.3 x 2.8 x 1.3" (135 x 72 x 31.8 mm)
135 x 72 x 31.8 mm (5.3 x 2.8 x 1.3")
Display
127 mm (5") diagonal
Display Luminance
300 nits (typical)
Document Number, And Issue Date And/or Revision Level
UA-Intercom-Viewer, V01
Enclosure Materials
Glass, polycarbonate
Management Interface
Ethernet
Max. Power Consumption
5W
Microphone
Yes
Mount Material
Aluminum alloy
Mounting
Wall (Included)
Gang box mount (Gang box not included)
Networking Interface
(1) 10/100 Mbps RJ45 port
Operating Environment
Indoor use only
PoE Cabling Requirements
Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Resolution
720 x 1280 (9:16)
Screen Orientation
Portrait
Software
Management application: UniFi Access: Version 1.22.17 and later
Software Information
The software version of a product can be checked at https://unifi.ui.com
Speaker
Yes
Supported Voltage Range
44–57V DC
Touch Screen Technology
Capacitive multi-touch
UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Weight
5.9 oz (168 g)
168 g (5.9 oz)