Description
The ULTRA II vehicle loop detector is a compact, energy-efficient design with a user-friendly, detachable 7-pin terminal block that simplifies set-up. This vehicle loop detector provides a relay output indicating vehicle presence or pulse on entry. The ULT-II also has an option for automatic sensitivity boost (ASB) which causes the sensitivity to increase following initial detection. This feature is useful to prevent dropout when detecting high-bed vehicles. The ULT-II is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™ display. Ten sensitivity settings allow for finer adjustment of the detection level, and four frequency selections help to prevent crosstalk in multi-loop applications.
Features:
- Fail safe in the event of a loop failure
- Fail secure in the event of a power loss
- Frequency count/reset switch
- 10 sensitivity settings
- Lightning and surge protection
- ULTRAMETER™ displays optimum sensitivity setting / diagnostic aid
Technical Specifications
Voltage
12-24 VDC/AC
Current
18 mA max.
Loop Type
20-2000μH (Q factor > 5)
Material
ABS
Surge Protection
Loop circuitry protected by surge suppressors
Relay Output
- 1A@24VDC Common
- Normally Open
- Normally Closed
Indicator
LED
Operating Temperature
-40o C-82o C (-40o F-180o F)
Operating Humidity
0-95% relative humidity
Dimensions (L x W x H)
3” (76 mm) x 0.9” (22 mm) x 2.75” (70 mm)
Weight
0.15 lbs. (68g)
Compliance
CE
Connector Type
7 pin male
Warranty
2 Years Warranty
Warranty
2 Years Warranty
