Description
A simple, all-in-one kit for UniFi Access, designed to manage a single door with one reader. Supports seamless setup for modern, secure access control.
Technical Specifications
Ambient Operating Humidity
5 to 90% noncondensing
Ambient Operating Temperature
-30 to 45° C (-22 to 113° F)
Button
(1) Factory-reset
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Connectivity
BLE 4.1
Digital Input
Request to exit/request to enter/remote release/door position sensor
Dimensions
3.37 x 2.13 x 0.03" (85.6 x 53.98 x 0.84 mm)
85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03")
Document Number, And Issue Date And/or Revision Level
UA-G2/UA-G2-Black, V02
Dry Output Relay
Lock: 30V DC, 1A
Aux: 30V DC, 1A
Lock: 30V DC, 1A
Aux: 30V DC, 1A
ESD/EMP Protection
Air: ±15kV, contact: ±8kV
Enclosure Material
Polycarbonate, glass
Format
ISO 7810 ID-1
LEDs
R/G/B/W (Learn more)
Max. Power Consumption
5W
Mounting
In wall, gang box
Mounting Material
Polycarbonate
NFC Frequency
13.56 MHz
NFC Read Range
< 30 mm
NFC Technology
ISO/IEC 14443 Type A
MIFARE DESFire
UniFi Access Proprietary Security Protocol
ISO/IEC 14443 Type A
MIFARE DESFire
UniFi Access Proprietary Security Protocol
Networking Interface
(1) 10/100 MbE RJ45 port
Operating Environment
Outdoor use
PoE Cabling Requirements
Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
PoE Input
50V DC, 1A
PoE Output
PoE passthrough, (4) PoE, 50V DC, total 20W
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Powered Output Relay
Lock: 12V DC, 1A
Aux: 12V DC, 0.33A
12V DC, 0.33A
Lock: 12V DC, 1A
Aux: 12V DC, 0.33A
12V DC, 0.33A
Sensors
Proximity sensor
Software Information
The software version of a product can be checked at https://unifi.ui.com
Speaker
(1) 8 ohm, 0.7W
Supported Voltage Range
48V DC
UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Weatherproofing
IP55
Weight
0.18 oz (5 g)
5 g (0.18 oz)
Wiring Gauge Requirements (AWG)
Total length to deviceOutput load current at 12V DC100mA250mA500mA1A 6.1 m (20 ft)2222221815.2 m (50 ft)2222221830.5 m (100 ft)22221818
UACC-Cable-DoorLockRelay (18 AWG) is recommended.
Total length to deviceOutput load current at 12V DC100mA250mA500mA1A 6.1 m (20 ft)2222221815.2 m (50 ft)2222221830.5 m (100 ft)22221818
UACC-Cable-DoorLockRelay (18 AWG) is recommended.